Repara tus cosas Comunidad Tienda

Lefant M210 Battery Replacement

Introducción

Robotic vacuum batteries generally last 2-3 years, depending on usage. Over time, you may notice that the battery holds less charge, requires more frequent recharging, or a decrease in cleaning performance. Use this guide to help replace your battery and restore your Lefant M210 robot vacuum to like-new performance.

Before you begin this repair, turn off the vacuum.

Qué necesitas

  1. Lefant M210 Battery Replacement, Brush: paso 1, imagen 1 de 2 Lefant M210 Battery Replacement, Brush: paso 1, imagen 2 de 2

    • Flip the Lefant M210 over to have a clear view of the brushes.

    Traducir

  2. Lefant M210 Battery Replacement: paso 2, imagen 1 de 3 Lefant M210 Battery Replacement: paso 2, imagen 2 de 3 Lefant M210 Battery Replacement: paso 2, imagen 3 de 3

    • Place the blue tool under the circular part of the brush in the center

    • Push down the other end of the tool to pop out the brush component

    • When replacing, align the bottom of the brush with the connector on the vacuum and push down to set it in place.

    Traducir

  3. Lefant M210 Battery Replacement, Wheel Assembly: paso 3, imagen 1 de 1

    • Use a Phillips screwdriver to remove four screws near each wheel.

    Traducir

  4. Lefant M210 Battery Replacement: paso 4, imagen 1 de 2 Lefant M210 Battery Replacement: paso 4, imagen 2 de 2

    • Remove the plastic cover next to each wheel.

    • Grip both sides of the wheel and pull upwards.

    • The wheels of the device require some force to remove.

    • Don't pull the wheels too hard as they are attached to cables and may be damaged if yanked.

    Traducir

  5. Lefant M210 Battery Replacement: paso 5, imagen 1 de 3 Lefant M210 Battery Replacement: paso 5, imagen 2 de 3 Lefant M210 Battery Replacement: paso 5, imagen 3 de 3

    • Hold the wheel up and detach the connector to release it from the device.

    Traducir

  6. Lefant M210 Battery Replacement, Dustbin Filters: paso 6, imagen 1 de 1

    • Open the dustbin compartment.

    Traducir

  8. Lefant M210 Battery Replacement: paso 7, imagen 1 de 2 Lefant M210 Battery Replacement: paso 7, imagen 2 de 2

    • With your hands, gently pull the dustbin to remove it from its compartment.

    Traducir

  9. Lefant M210 Battery Replacement: paso 8, imagen 1 de 1

    • With your hands, pull off the filter compartment from the dustbin.

    Traducir

  10. Lefant M210 Battery Replacement: paso 9, imagen 1 de 1

    • Pull off the filter from the filter compartment.

    Traducir

  11. Lefant M210 Battery Replacement, Battery: paso 10, imagen 1 de 1

    • Use a Phillips #1 screwdriver to remove the six screws around the bottom edge of the device.

    Traducir

  12. Lefant M210 Battery Replacement: paso 11, imagen 1 de 2 Lefant M210 Battery Replacement: paso 11, imagen 2 de 2

    • Carefully flip the vacuum back right-side-up, making sure you're holding it all together so that the bottom portion doesn't fall out.

    • Rotate the vacuum so that the Lefant logo is facing you.

    • Carefully lift the white cover of the vacuum, opening it like a laptop, from front to back.

    • Rest the open cover something stable, like a wall.

    Traducir

  13. Lefant M210 Battery Replacement: paso 12, imagen 1 de 2 Lefant M210 Battery Replacement: paso 12, imagen 2 de 2

    • Use a Phillips #1 screwdriver to remove the three screws securing the motherboard to the device.

    Traducir

  14. Lefant M210 Battery Replacement: paso 13, imagen 1 de 1

    • Carefully lift the motherboard, ensuring you don't rip any cables that are connected to it.

    • The battery should be under the motherboard.

    Traducir

  15. Lefant M210 Battery Replacement: paso 14, imagen 1 de 2 Lefant M210 Battery Replacement: paso 14, imagen 2 de 2

    • Push the two retaining clips away from the battery while pulling the battery up from the tabs attached to it to free it.

    • Retaining clips

    • Battery tabs

    • Work on freeing one side at a time so that it's easier to free the battery.

    Traducir

  16. Lefant M210 Battery Replacement: paso 15, imagen 1 de 1

    • When the battery is free from it's housing, lift it out completely using its pull tabs.

    Traducir

  17. Lefant M210 Battery Replacement: paso 16, imagen 1 de 2 Lefant M210 Battery Replacement: paso 16, imagen 2 de 2

    • Locate the battery connection wire and carefully pull apart the connection.

    • Pinch the motherboard's wire connector and pull the connection apart.

    • The connection is secured by a clothespin-like mechanism.

    • When you replace your battery with a new one, allow the robot vacuum to fully charge for a few hours before using it again.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Darien Amador

Miembro Desde 09/09/24

195 Reputación

1 Guía escrita

Insignias: 2

Equipo

CSU Los Angeles, Team 2-4, Kershman Fall 2024 Miembro de CSU Los Angeles, Team 2-4, Kershman Fall 2024

CSULA-KERSHMAN-F24S2G4

Miembros de 4

4 Guías creadas

1Guía Comentario

Great guide! Any knowledge on how or why mine beeps twice even when it is on the ground?

Jonathan Manuel - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 14

Ultimos 7 días: 114

Ultimos 30 días: 577

Todo El Tiempo: 2,798